Description
PLEASE NOTE: Due to materials and supply chain delays we are currently operating on a 8 week estimated lead time on these kits.
This is just an estimation. Please be patient with us while we build these as fast as possible.
Turbo Kits are custom built to order and non-refundable
IRP EFR single turbo kits are ready and available to the public featuring only the best components.
Lightning fast response with good power potential.
ZERO boost creep.
Internal wastegate for simplicity and low noise.
Integrated boost control solenoid and blow off valve eliminate the need to purchase these components separately.
EFR 7670
This turbo is very comfortable around the 380-400 wheel hp range and will do more at higher boost.
Compressor Specifications
- Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
- Compressor Wheel OD (exducer): 76mm
- Compressor Wheel Inducer: 57.2mm
- Max Flow Rate: 64 lb/min
- Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
- Compressor Housing Connections:
- Inlet: 3.5″ Hose Coupler
- Outlet: 2.0″ Hose Coupler
Turbine Specifications
- Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
- Turbine Wheel OD: 70mm
- Stainless Steel Investment cast Housing
The IWG EFR 7670 is available in (2) different turbine housing configurations:- 0.83 A/R T3 Undivided (Internal WG) – Part # 179351
- 0.92 A/R T4 Twin Scroll (Internal WG)- Part # 179390
EFR 8374
Excellent response and 400whp+ on pump gas.
Capable of approaching and exceeding 500whp at higher boost.
Compressor Specifications
- Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
- Compressor Wheel OD (exducer): 83mm
- Compressor Wheel Inducer: 62.6mm
- Max Flow Rate: 79 lb/min
- Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
- Compressor Housing Connections:
- Inlet: 4″ Ported Shroud Hose Coupler
- Outlet: 2.5″ Hose Coupler w/ integrated Vband option
Turbine Specifications
- Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
- Turbine Wheel OD: 74mm
- Stainless Steel Turbine Housing – The IWG EFR 8374 is available in (2) different turbine housing configurations, all use 3″ vband (92mm OD): [list]
- 0.83 A/R T3 Single Scroll (Internal WG) – Part # 179258
- 0.92 A/R T4 Twin Scroll (Internal WG)- Part # 179357
EFR 9180
Excellent response and 500whp+ on pump gas.
Capable of approaching and exceeding 600whp at higher boost.
Compressor Specifications
- Compressor Type: Forged-Milled Wheel (FMW) Extended Tip
- Compressor Wheel OD (exducer): 91mm
- Compressor Wheel Inducer: 67.7mm
- Max Flow Rate: 91 lb/min
- Built-in BOV: All EFR compressor housings incorporate an integrated BOV.
- Compressor Housing Connections:
- Inlet: 4″ Ported Shroud Hose Coupler
- Outlet: 2.5″ Hose Coupler w/ integrated Vband option
Turbine Specifications
- Turbine Type: Low Inertia Gamma-Ti Turbine Wheel
- Turbine Wheel OD: 80mm
- Stainless Steel Turbine Housing – uses 3″ vband (92mm OD):
- 0.83 A/R T3 Single Scroll (Internal WG)
Purpose built stainless steel equal-length manifold.
Our manifold is 2″ schedule 10 stainless steel, equal length. This is crucial to maintain even exhaust gas temperatures and controlling boost. Runner length and diameter have been calculated from years of testing and experience. Our manifolds are tuned to the exhaust pulses of the 2 rotor engine.
Stainless steel downpipe
Our downpipe has minimal bends and incorporates a flex section to alleviate stress on the manifold and rest of the exhaust system while ensuring a good fit with the variety of midpipes available on the market.
Oil and coolant lines
DEI heat sleeving is included in every kit for protection and heat management.
Gaskets and hardware
We includes inconel gaskets and locking hardware required for installation of the turbo kit..
Fits a wide range of stetups
Most stock mount, front mount, or vmount intercoolers.
Plenty of room for an idler pulley.
Guaranteed to outperform anything else comparable on the market.
Proudly made in the USA by rotary enthusiasts for rotary enthusiasts.
Reviews
There are no reviews yet.